Table of Contents
What transmission does a 1992 S10 have?
What fluid should I be using? A: Sounds like your S-10 is equipped with the Borg Warner 77mm five-speed manual transmission that uses about 4.4 pints of Dextron II automatic transmission fluid during a service. There was also a Muncie five-speed that was used less often on the ’92 S-series with 5W-30 motor oil.
What manual transmission is in a 1991 S10?
5-speed manual
TRANSMISSION: 5-speed manual with overdrive. specifications for details.
What transmission is in my 1991 S10?
TRANSMISSION: 5-speed manual with overdrive.
What is a 91 S10 worth?
1991 Chevrolet S-10 trade-in prices range from $275 – $1,759. Get a more accurate value for your car with the Edmunds appraisal tool.
What transmission is in my 1990 S10?
It was equipped with a 4L60 automatic transmission and a limited-slip differential with 3.42:1 gearing.
What transmission is in a 91 s10?
TRANSMISSION: 5-speed manual with overdrive. specifications for details.
What kind of transmission does a Chevrolet S-10 use?
To all the questions for the 98-02 YEARS 2.2 automatic 4L60E trans on a S-10…the 98-02 YEARS 3.8L V6 automatic Camaros and Firebirds bell housing is the same. Just did a bunch of research and found the casting number on my broken bell housing.
Can a Chevy S10 Blazer use a 4.3 Trans?
23 people found this helpful. Btw a 4.3 trans won’t work, it has to be behind a 2.8, 3.1 or 3.4 14 people found this helpful. Will a 2000 chevy s10 blazer transmission work in a 1999 s10 truck 26 people found this helpful. Yes, as long as they are both 4.3 engines 14 people found this helpful.
Can a 5 speed transmission fit in a s series truck?
The five speeds are T5’s, but they are different than the T5’s in the S series trucks in several dimensions, and they won’t easily fit into any S series truck. The shifter is located further back, and the tail shaft housing is different, putting the rear mount in a different location.
What kind of engine does a 4.3L V6 fit?
Basically the 3.8L V6 is to a 305cid V8, as the 4.3L V6 is to a 350cid V8. The only thing I’m not sure of is whether at the Gen-II changeover on the 3.8L, did they switch to the SBC bell housing pattern?