Table of Contents
What size socket do you need to change brake pads?
You at least need a set of 3/8″ (drive size) sockets set with sizes 8-19mm. Some vehicles use Allen or Torx bits for the caliper guide pins. Torx and Allen bits are not interchangeable. The wrong bit may feel like it fits, but it might damage the female head of the bolt.
What tools do you need to change rear brake pads?
Tools Required
- Disposable mechanic’s gloves to protect your hands and keep them clean.
- Jack and jack stands.
- Lug wrench.
- C-clamp or length of wood to retract the piston.
- Wrench (choose a socket, open end or adjustable wrench)
- Turkey baster for drawing out brake fluid.
- Plastic tie, bungee cord or piece of string.
Can I just replace rear brake pads?
You can replace your brake pads in pairs (the front or the rear) at the same time or separately. It’s also important to note that your front and rear brake pads wear at very different rates. The front brake pads do most of the work, causing them to wear faster and need replacement more often.
What size C-clamp do I need for brake pads?
So 4 inch c-clamp will definitely work. Looks like changing pad is a very easy job.
What tool do you need to change brake pads?
Allen Wrench Set It’s one of the tools needed to change brakes as the brake calipers are often held in place by Allen bolts that need to be removed. Lubricants and greases may also be needed depending on the job but having at least these basic tools on hand ensures you’re ready to change your brakes.
Do you need to bleed brakes when changing pads?
The only way to be sure your system doesn’t have an air bubble is to bleed your brakes after repairing the leak. If you’re replacing worn brake pads, which can cause air to enter the master cylinder. If you change your rotors or pads. Any brake job should include a brake bleed for safety’s sake.
How much are brakes for a Ford Explorer?
2021 Ford Explorer brake pads replacement, which includes aspects and labor, can price anywhere between $150 and $300 per axle depending on the type of brake pads desired and the extent of the damage your previously worn down pads have caused to the alternative components of your vehicle such as the rotors.
How long does it take to change rear brake pads?
Usually, changing a set of brake pads takes approximately 30 minutes to an hour. If you have a professional complete the work, expect to pay for about an hour’s worth of labor. It’s worth pointing out that, as an amateur, it could take you upwards of 3 or 4 hours (maybe even longer) to replace your brake pads.
Do you need C clamps to change brake pads?
Your brakes don’t require C-clamps, unless you are thinking of another part and just calling it the wrong thing. This, no clamps needed to do your pads.