Table of Contents
- 1 How much oil does the 706 hold?
- 2 What is the horsepower of a Farmall 706?
- 3 How much does a 706 International tractor weigh?
- 4 How many quarts of oil does a Farmall H take?
- 5 What year did the Farmall 706 come out?
- 6 What engine is in a 706 international?
- 7 What are the specs of a Farmall 706 tractor?
- 8 What is the fuel capacity of a 706 diesel?
How much oil does the 706 hold?
Farmall 706 Engine
Engine Oil | |
---|---|
Oil capacity: | 9 qts 8.5 L |
How much oil does a Farmall hold?
Farmall Super A Engine
Engine Oil | |
---|---|
Oil capacity: | 5 qts 4.7 L |
Oil change: | 120 h |
What is the horsepower of a Farmall 706?
Farmall 706
Farmall 706 Power | |
---|---|
Engine (gross): | 89 hp 66.4 kW |
Drawbar (claimed): | 65 hp 48.5 kW |
PTO (claimed): | 73.5 hp 54.8 kW |
Drawbar (tested): | 67.46 hp 50.3 kW |
Is IH 706 a good tractor?
A gas-powered, 65 hp 706 Farmall is a good tractor, but a 130 hp diesel-powered 706 is even better. Brian Tworkoski says converting a 706 to diesel power is a snap. All you need is a 400 Series International diesel engine and a clutch and flywheel to match. When the clutch went out on the 706, he decided it was time.
How much does a 706 International tractor weigh?
International Harvester 706
Dimensions & Tires | |
---|---|
Wheelbase: | 87.5 inches 222 cm (2WD) |
87 inches 220 cm (4WD) | |
Weight: | 8100 to 9160 pounds |
Front tire: | 7.50-18 |
How much horsepower does a 756 International have?
International Harvester 756
International Harvester 756 Power | |
---|---|
PTO (claimed): | 76.5 hp 57.0 kW |
How many quarts of oil does a Farmall H take?
Farmall H Engine
Engine Detail | |
---|---|
International Harvester C-152 | |
Starter volts: | 6 |
Oil capacity: | 6 qts 5.7 L |
Coolant capacity: | 16.5 qts 15.6 L |
How many quarts of oil does a Farmall Cub hold?
Farmall Cub Engine
Engine Oil | |
---|---|
Oil capacity: | 3 qts 2.8 L |
Oil change: | 120 h |
What year did the Farmall 706 come out?
1963
The Farmall 706 was introduced by International Harvester (IH) in 1963, continuing in production until 1967. Selling a total of 46,146 vehicles, IH placed a sticker price of $6,100 on this tractor in 1967.
How much does an international 706 weigh?
What engine is in a 706 international?
Farmall 706 | |
---|---|
Weight | 8,285 pounds (3,758 kg) gasoline, 8,530 pounds (3,870 kg) diesel, 10,710 pounds (4,860 kg) ballasted |
Propulsion | Rear wheels |
Engine model | International Harvester C263 (gasoline), D282 (diesel) |
Gross power | 89 horsepower (66 kW) (gasoline) |
How much does a 756 tractor weigh?
International Harvester 756
Dimensions & Tires | |
---|---|
Wheelbase: | 101 inches 256 cm |
Weight: | 8384 lbs 3802 kg |
Front tire: | 9.5L-15 |
Rear tire: | 18.4-34 |
What are the specs of a Farmall 706 tractor?
706 International Farmall Tractor Specs 1 Engine. The Farmall 706 had several engine designs during its production period. The engine for the 706 appeared in several incarnations. 2 Transmission. Powerful transmissions are needed in agricultural equipment. 3 General Information. The Farmall 706 was designed for sloping farmland.
What kind of oil filter does a Farmall tractor use?
Farmall Oil Filter – Oil filter element, cartridge type with gasket. For gas engines: C248, C335, C350, in tractors: M and MV to serial number 59393, I6 and W6 to serial number 4242, W9, 600, 650.
What is the fuel capacity of a 706 diesel?
Likewise, total fuel capacities diverge, with the diesel models operating with a maximum of 33 gallons and the gas and LP versions capping out at 39 gallons. Powerful transmissions are needed in agricultural equipment. The 706 transmission is sliding gear but has a Torque Amplifier (TA), possessing a hydraulic under-drive pulley.
What is the weight of a Farmall tractor?
Dimensionally, the tractor runs lengths of 157 inches (2WD), 161 inches (4WD) and 162 inches (Hi-Clear). The operating weight of the Farmall 706 differs according to the engine used, yet falls in a range of 8,285 and 9,160 lbs., clearing the ground at 17 inches high.