Menu Close

Can you add too much shock to a swimming pool?

Can you add too much shock to a swimming pool?

Can you put too much shock in a pool? SKIMMER NOTES: It’s unlikely but it could happen. It would take a lot of shock to really make the water unsafe for swimming. The best way to make sure you’re safe to swim is to test your pool water and make sure free chlorine levels are between 1-4ppm for healthy swimming.

Can too much shock damage pool liner?

Using too much shock may result in a brief down period of your pool. A pool that’s been recently shocked can cause skin irritation, bleached clothes, and a bleached pool liner. To avoid vinyl damage, you can mix shock with water in a bucket and make sure it’s completely dissolved before adding it to your pool.

Can you double shock a pool?

In this case, you should double shock your swimming pool water. To double shock, you will need to add 2 pounds for every 10,000 gallons of water. For instance, if you pool is 20,000 gallons, you will add 4 pounds of shock.

Why is a pool cloudy after shock?

Cloudy or milky water after shocking is normal, and the water should clear up within an hour or so. Just make sure your pump and filter are running properly. If you add algaecide, keep in mind that some algaecide contains copper, which can actually make a pool cloudy.

What do you do if you over shocked the pool?

If you put too much shock in the pool, simply wait it out. If you have a cover on your pool, take it off. The more sun that hits your water, the faster it will dissipate. Technically, if your free chlorine levels are holding up swimming UP TO your shock level, depending on your CYA, is safe.

How long do you have to wait to swim after you shock a pool?

When doing a pool shock (superchlorinating the pool with concentrated chlorine), you should wait between eight and 36 hours before swimming in your pool. When adding less-caustic chemicals like calcium chloride , sodium bicarbonate and muriatic acid, wait for the pool to turn over, or completely run all the water through its filtration system.

How and when you should shock your pool?

You Can Smell Chlorine. Pools that reek of chlorine are trying to tell you something: they are lacking in chlorine.

  • There Was A Surge In Pool Use. People love a good pool party.
  • There Was Heavy Rain.
  • Your Water Temperature Soared.
  • You Just Opened or Closed Your Pool.
  • What to do if put too much shock in pool?

    The best thing you can do if you put too much shock in your pool is to wait it out. Pro tip: the more sunlight your pool water gets, the faster the shock will dissipate. This is an example of what a reading on a test strip will look like.