Table of Contents
- 1 What procedures do you follow when leaving the vehicle?
- 2 What is the first step in moving from traffic to the curb?
- 3 What are the steps to the Sipde system?
- 4 Which of the following should be the first step when starting any car with an automatic transmission?
- 5 Which is the proper order of actions when you are leaving a parking spot on a roadway?
- 6 What is the first thing you should do when you run your right or left wheels off the road?
- 7 What is the first step in the spider method?
- 8 What are the steps to laying a road?
- 9 What do you need to know before paving a road?
- 10 How long does it take for a road to be paved?
What procedures do you follow when leaving the vehicle?
What procedure do you follow when leaving the vehicle?…
- Be sure the parking brake is set.
- Press the clutch pedal to the floor with your left foot.
- Put the gear-shift lever in neutral.
- Turn on ignition switch and check warning lights.
- Turn the key forward until the engine starts, then release it.
What is the first step in moving from traffic to the curb?
The first step when moving from the roadway to the curb is to check traffic – Front/Rear/Sides. Controlled braking is pressing on the brake pedal just enough to slow the car’s momentum.
What is the first thing you should do when making an off road recovery?
Here are certain things you can do to recover:
- Do not panic.
- Hold your steering wheel tightly.
- Steer straight ahead.
- Stay on the shoulder.
- Ease up on the accelerator and brake gently.
- When you can safely do so, turn back on the road at a low speed.
What are the steps to the Sipde system?
The SIPDE process is short for search, identify, predict, decide and execute.
Which of the following should be the first step when starting any car with an automatic transmission?
If you are in an automatic transmission car, follow these steps to start the vehicle: Place your key in the ignition and turn it to the ‘on’ (third) position. Press the brake pedal. Switch the gear to Drive (D).
What are the 3 steps after a collision?
Pull Over, Call 911, and Get a Police Report Put the car’s hazard lights on, even after you’ve moved out of the way, so that approaching drivers can see you and the vehicles.
Which is the proper order of actions when you are leaving a parking spot on a roadway?
Which is the proper order of actions when you are leaving a parking spot on a roadway? Turn your signal on, check your mirrors, check your blind spot, pull out into the traffic lane.
What is the first thing you should do when you run your right or left wheels off the road?
Apply the brakes and turn the front wheels sharply to the left. If your vehicle leaves the roadway, hold the steering wheel firmly, release the gas pedal, and gently apply the brakes. Wait until your speed has reduced, check the traffic, and look for a place to safely return to the roadway by merging back into traffic.
What do you do first when exiting the interstate?
The first step to exiting the interstate is to maintain your speed. The next thing that you should do is make a lane change towards the exit as soon as possible. As you approach your exit you should: – Signal within 300 feet of the exit. – Make a lane change as the off-ramp is created.
What is the first step in the spider method?
Method/Results: SPIDER is an acronym standing for scanning, predicting, identifying, decision making, and executing a response.
What are the steps to laying a road?
The area on which the road will be laid must first be cleared of all vegetation, trees, shrubs and bushes. After this process is completed, the next steps involve shaping, mounting and grading the surface: Mounting: Mounting gives the road its shape.
What should you do when exiting a highway?
When exiting a highway, drivers must move through multiple lanes of fast-moving traffic, make speed adjustments and be ready to abide by new road signs, pavement markings and traffic control devices. Just like entering a highway, exiting one presents a significant risk.
What do you need to know before paving a road?
Below are just a few of the items that must be considered before beginning road maintenance: The area on which the road will be laid must first be cleared of all vegetation, trees, shrubs and bushes. After this process is completed, the next steps involve shaping, mounting and grading the surface:
How long does it take for a road to be paved?
These are just a few of the steps involved in paving a road. In reality, the entire asphalt paving process can take years to complete. And while knowing how a road is paved may not help you reach your destination any faster, we hope it gives you something to think about the next time those orange barrels slow you down.