Do eyelet curtains need to be double width?

Do eyelet curtains need to be double width?

Measuring for ready made eyelet curtains is very simple. There is no need for exact or precise measurements. Double the width to determine the total curtain width you need for your window.

How gathered should eyelet curtains be?

Eyelet curtains pleat in a concertina style and therefore always look slightly less full than pencil pleat curtains. I find that they look better with two to two and a half times gather and would always choose the larger size. The width of the tabs on tab top curtains mean that they can only be pushed back so far.

How much curtain fullness do I need?

A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

How much space should be between eyelets?

Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge. If there is a window frame, blinds or shades on the window, you will want the spacing to clear what is behind the rod.

How much wider Should a curtain pole be than the window?

To make sure you achieve the perfect fit, measure the recess width of the window and then add at least another 15cm for each side. How much should a curtain pole overhang? We advise that your curtain pole is 30cm longer than your window is wide (15cm on each side).

When buying a pair of curtains What is the width?

The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.

How wide should curtains be for a 48 inch window?

Curtain Width Guide If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.

When buying curtains are the measurements per curtain?

All our ready made curtains are sold as pairs, and the sizes stated refer to the size of each curtain. For example, in a pair of curtains 46″ wide x 54″ length, there will be two curtains, each measuring 46″ wide.

What size rod do you use for eyelet curtains?

If you can’t find the grommet size on the label, use a ruler to measure the inside width on 1 of the grommets. If you don’t want to measure, a rod with a width between 1 3⁄8 to 1 1⁄2 inches (3.5 to 3.8 cm) will probably work for most eyelet curtains.

How to measure a window for new eyelet top curtains?

These simple rules I use when measuring up a window for new eyelet top curtains. Will make them look great and also work perfectly. Fit your curtain pole at least 3 inches over the top of your window. Assuming there is room over the window recess, it justl looks better.

What is the total width of my curtains?

The total width of your 2 curtains would be in total 150 cm when stretched out. Curtain width per one curtain: 150 cm / 2 = 75 cm The table below shows how much fabric we use for each style in order to achieve the right width for your curtains

How wide should a curtain pole be in a room?

Especially in rooms with high ceilings. This allows the eyelet rings to sit over the wall so is not seen from outside. I think it just looks that much better. The curtain pole width should be the width of your window, plus at least 5 or 6 inches past both sides.