Menu Close

Why does my Roku remote randomly stop working?

Why does my Roku remote randomly stop working?

Reset Your Roku Remote Remove the batteries from your Roku remote. Remove the power supply from the Roku box/stick (or go to Settings > System > System Restart > Restart if you have an IR Roku remote that’s still working). Wait 10 seconds and then reconnect your Roku box to the power. Wait for the Home screen to load.

How do I resync my Roku remote?

To re-pair your remote:

  1. Remove the power cable from your Roku device, wait 5 seconds and then re-connect the power cable.
  2. Wait until your Roku device displays the home screen.
  3. Restart your remote.
  4. Press and hold the pairing button for 5 seconds until you see the status light begin to flash.

Does Roku Ultra have a reset button?

If you’re using Roku 4 or Roku Ultra, you reboot or soft reset your device by going into System Settings. To do that on Roku Ultra, go to Settings > System > Power > System Restart. However, in the older Roku models, you’ll find the Reset button at the back of the streaming box.

Can you replace a Roku ultra remote?

Replace the remote control. Contact tech support to find out. Roku sells replacement remote controls on its website, which range from $15 to $30. The site clearly denotes which remotes work with which models, so be sure to check that before picking one up.

Do Roku remotes go bad?

Roku Replacement Remote Malfunctioning or leaking batteries can cause overheating and can damage or render the remote useless. If this is the case, replace the remote. You can go to or a site like Amazon that sells licensed Roku remotes and third-party compatible remotes.

Why is my remote control not working?

Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.

What do you do if your Roku remote stops working?

To reset your Roku remote, you need to take out the batteries, unplug your Roku device and plug it back in, replace the batteries, and hold down the reset button until the remote re-pairs.

Why is my Roku Ultra not working?

First, make sure that your power cable is connected properly and plugged in. If it still won’t turn on, remove the power cable for five seconds, and then plug it back in. If that fails then you will have to reset your Roku device using the reset button. If it still won’t work, you can contact Roku support.

How do I get my Roku to work without a remote?

Download and install the Roku app. The app is available on the Google Play Store for Android devices and the Apple App Store for iPhones and other Apple devices. Note: There are a lot of third-party apps, so make sure to select the official app from Roku Inc.

How do I fix an unresponsive Roku remote?

How to fix a Roku remote: Pair your Roku remote

  1. Remove the batteries from your Roku remote, then reinsert them.
  2. Reboot the Roku device (if it doesn’t have a physical button, unplug and re-plug in its power supply.)
  3. Hold down the pairing button while the device starts up.

How do I fix my Roku remote not working?

Common Troubleshooting Techniques Reboot the Roku box or remove the streaming stick from your TV. Give it a minute, connect it again, and then retest. Remove the batteries from the remote, leave them out for a second, then replace them and retest. Change the batteries in the remote control and retest the device.

Why does my Roku Ultra remote stop working?

One of the most common reasons that your Roku TV stops working is the missed key presses. When your device sits in a position, where the signals from your remote are blocked (completely or partially), it stops working. Since the commanding signals are not reaching it, your device has stopped working.

How do I troubleshoot my Roku?

Basic Troubleshooting for Roku. There are a series of troubleshooting steps you can take to ensure you are receiving an optimal experience on The CW and CW Seed channels. Check your internet connection. Go to Settings > Network on your Roku player to check that your connection is active and the signal strength is stable.

How do I Sync my Roku remote?

Press and hold the pairing button underneath the remote or in the battery compartment until you see the pairing light flash. Wait 30 seconds or so for everything to sync up and then retest. Re-pair the device with the mobile app. Occasionally, the Enhanced Roku remote will drop the pairing and stop working.

How do you pair a remote to Roku?

How to manually pair a Roku remote with a Roku player . 1. Make sure that you have fresh, working batteries in your Roku remote and that you keep it close — within a couple of feet — of the Roku player. 2. Unplug the Roku player, leave it unplugged for two minutes, and then plug it back in again.