How do you reset the change oil light on a Pontiac Grand Am?

How do you reset the change oil light on a Pontiac Grand Am?

Turn the ignition to ON, with the engine off. Fully press and release the accelerator pedal slowly 3 times within 5 seconds. The reset is complete when you hear the chimes and the CHANGE OIL light goes out. However, if the light stays on and no chime is heard, you will need to repeat the reset procedure.

How do you reset the change oil light on a 1999 Pontiac Grand Am?

Push the RESET button located in the driver’s side instrument panel fuse block, and release the button. The CHANGE OIL light indicator will start to flash. Press and hold the RESET button again. The reset is complete when you hear the chimes and the CHANGE OIL light goes out.

How do I reset my change oil light after oil change?

Push the accelerator pedal three times all the way to the floor, in less than 10 seconds. Turn the ignition off, and the light will disappear, resetting the indicator.

How do you turn off the service engine soon light on a 2003 Pontiac Grand Am?

How to Reset the Service Engine Soon Light on a Grand Am

1. Turn the ignition switch on without starting the engine.
2. Press the “Options” button on the instrument panel until the service light is displayed.
3. Press the “Set/Reset” button to open the reset confirmation screen. Turn the ignition switch off.

How do you reset the change oil light on a 2005 Pontiac Grand Am?

2004-2005

1. Turn ignition switch to ON position with engine off.
2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
3. Change Oil lamp will flash for 2-10 seconds while it resets.
4. Once it stops flashing, the maintenance light reset is complete.

How do you reset the change oil light on a 2000 Pontiac Grand Am?

2000-2005 Pontiac Grand Am Change Oil Light Reset

1. Turn the ignition key to the “ON” position. Don’t start the engine!
2. Fully press and release the accelerator pedal to the floor slowly 3 times within five seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

How do you reset the oil light on a 2003 Pontiac Grand Prix?

Reset oil service light Pontiac Grand Prix 2003 using the Driver Information Center (DIC).

1. With the ignition key in RUN/ON but the engine off.
2. Fully push and release the accelerator pedal slowly 3 times within 5 seconds.
3. If the CHANGE OIL SOON light flashes, the system is resetting.

How do you reset the dashboard lights?

How to Reset the Warning Lights on the Dash

1. Open the hood of your vehicle.
2. Loosen the nut that holds the negative terminal to the battery with the pliers.
3. Completely remove the cable from the negative battery terminal.
4. Leave the battery disconnected for 10 minutes to ensure that the computer is fully reset.

Why won’t my oil light go off?

If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.

How do you reset the service engine soon light on a Pontiac Bonneville?

Press & hold the OIL RESET button in the glove box for at least 6 seconds, but no more than 60 seconds. After 6 seconds, observe the CHANGE OIL SOON maintenance light flash 4 times before light goes off. This indicates that the engine oil life maintenance light system has reset.

How do you reset the change oil light on a 2003 Pontiac Grand Prix?

How do you reset the service engine soon light on a 2004 Pontiac Grand Am?

How do you reset the service engine light on a 2004 Pontiac Grand…

1. Turn the ignition to ON, with the engine off.
2. Fully press and release the accelerator pedal slowly 3 times within 5 seconds.
3. The reset is complete when you hear the chimes and the CHANGE OIL light goes out.

How to reset an oil change light after maintenance?

1 Turn the ignition key to the accessory position. 2 With the oil message displayed, locate the enter button on the driver information center. Press and hold the button for one second. 3 Start the vehicle. The oil change light will stay off until it is time to change your oil again.

How do you reset the oil change light on a Jeep Wrangler?

For certain Jeep products, including the Wrangler, how to reset an oil change light is as follows: Insert the key into the ignition and turn it to the “on” position without starting the engine. Depress the gas pedal slowly three successive times within 10 seconds. At this point, the system should have reset.

How do you turn off the oil change light on a Honda Accord?

If the light is still on, repeat the process. Otherwise, turn the ignition off and remove the key. The steps for turning off the oil change light for some Honda products, including the Accord, are as follows: Insert the key into the ignition, turning it without starting the engine.